LEGO Iron Man Helmet 76165 Light Installation Guide

Using components from our DIY Range, create a simple light up solution for your LEGO Iron Man Helmet set 76165.

Components required:

• 2x Cool White 15cm Bit Lights
• 1x 6-Port Expansion Board
• 1x AA Battery Pack or USB Cable
  
  

1. Remove sections:
   
   
   
   
   
2. Connect the Cool White Bit Lights to the expansion Board, then thread the expansion board through.
   
   
   
   
3. Ensuring the LEDs are facing down, lay them in between studs before reconnecting pieces.
   
   
   
   
4. Connect the Battery Pack to the expansion board out the back, then tuck in all the components and reconnect sections.